Paughco Roller F/S

[kgdb]

Posting this for a local guy (Wpg area) . Decent deal and some real kick ass stuff! I can check this stuff out for anyone that may be interested.

Paughco 30*, 2.25" stretch 4 spd belt drive rigid frame, brand new, neck cups installed.The measusurement between the axle plates will allow for a 180 tire with a 3/4" offest trannny. The trans plate (FabKev) is included.

39mm front end, from a late 90's sporty, great shape, narrow apes, 3" riser, brand new 21" chrome wheel and tire, caliper and new disc.Headlight there too.

New 180mm rear avon on a 16x5.5" new chrome wheel, new disc and FabKev retro caliper kit.

Motor is in pieces, but all major components are completely rebuilt. Truett and Osborn 4.75" stroke flywheels new S&S crank pin, bearings and races (rod), balanceed to S&S pistons, and piston pin bushings reamed to size. Heads are OE harley, totally rebuilt, new valves, seats, guides, S&S spring kit. Set up for high lift cam ( I had them set up for either a S&S 560 cam or a Leineweber L5, with high TDC lift). Cases are HD as well, with pinion race lapped to size, if I remember correctly, the pinion bearings will be .0008 over size, I do have it written down in the garage. OE HD cylinders, powder coated, and already modified for the stroker wheels. The pistons have to be fit to them yet. Pistons are S&S forged. S&S oil pump. Original rocker boxes. Only things needed basically are the valve train pieces (cam, pushrods, lifters and blocks). I have some of this stuff, and although it is not new, it is in good, really good shape. Once complete, the motor would be 92" with about a 9:1 comp ratio.

I also have a paughco 2.2 gallon mustang tank, new, (not shown) and a Font St. Cycle rear fender, that fits like a fukkin dube!! I have other stuff too, like oil tank, etc, but that can be discussed later.

The only reason I am considering selling it is due to the fact I have been looking for a specific year bike to come up, and now it has. I don't have to sell it, nor will I give it away, but it does have to go to get the other bike. So having said all that, I am wanting $5K for the whole shooting match as shown. And like I said, I have many extras not mentioned that I would probably be happy to throw in. I know I have almost 3 into the motor itself.